For : HUSQVARNA FE 501S 2016 HUSQVARNA FE 501S 2015 HUSQVARNA TE 300I 2019 HUSQVARNA TE 300I 2018 HUSQVARNA TE 250I 2019 HUSQVARNA TE 250I 2018 HUSQVARNA FE 350S 2016 HUSQVARNA FE 350S 2015 The CNC-machined triple clamp has the following features: Made of highest grade aluminum Perfectly tuned stiffness of the steering stem 100 % alignment of the fork tubes Perfect flexibility - precisely adapted to the Husqvarna WP fork Spun fork clamping after anodizing: This machining process increases the friction between the triple clamp and the fork tubes, with constant tightening torque, thus preventing twisting of the fork tubes in the triple clamp to a great extent. The special steering stem support additionally boosts this effect. Quick and easy offset adjustment between 20 mm or 22 mm: Disassembly of the front wheel and fork is not necessary! The triple clamp-offset is the distance of the horizontal center line of both fork tubes to the center of the steering axis, about which the fork legs are offset from the steering axis (referred to as dimension X). The offset set can be seen at a glance by the marking on the triple clamp. Offset adjustment options: Shorter offset: Stability on short straights Longer offset: easier and faster turning into bends Handlebar support 789.01.939.044/144/244/344/444 or the PHDS SXS.14.125.200 is additionally required for installation on TC and FC models as of 2016.
Description
For :
HUSQVARNA FE 501S 2016
HUSQVARNA FE 501S 2015
HUSQVARNA TE 300I 2019
HUSQVARNA TE 300I 2018
HUSQVARNA TE 250I 2019
HUSQVARNA TE 250I 2018
HUSQVARNA FE 350S 2016
HUSQVARNA FE 350S 2015
The CNC-machined triple clamp has the following features:
Made of highest grade aluminum
Perfectly tuned stiffness of the steering stem
100 % alignment of the fork tubes
Perfect flexibility - precisely adapted to the Husqvarna WP fork
Spun fork clamping after anodizing: This machining process increases the friction between the triple clamp and the fork tubes, with constant tightening torque, thus preventing twisting of the fork tubes in the triple clamp to a great extent.
The special steering stem support additionally boosts this effect.
Quick and easy offset adjustment between 20 mm or 22 mm: Disassembly of the front wheel and fork is not necessary! The triple clamp-offset is the distance of the horizontal center line of both fork tubes to the center of the steering axis, about which the fork legs are offset from the steering axis (referred to as dimension X). The offset set can be seen at a glance by the marking on the triple clamp. Offset adjustment options:
Shorter offset: Stability on short straights
Longer offset: easier and faster turning into bends
Handlebar support 789.01.939.044/144/244/344/444 or the PHDS SXS.14.125.200 is additionally required for installation on TC and FC models as of 2016.