This repair kit is a two-component epoxy adhesive.
Cures at room temperature, can be accelerated by increasing the temperature.
###
Use :
Particularly suitable for steel, but also for other metals, wood, concrete, ceramics, glass and most plastics. 
The steel stick is resistant to oil, petrol, diesel and battery acid, among other things.
Application:
Best results are achieved on clean, rough surfaces. 
Cut off the required quantity, knead for approx. 1 minute until a uniform colour is obtained. 
Work in within 2 minutes.
At first, the material does not seem to adhere: press the kit against the surface anyway. 
Remove any excess material. 
When applying or repairing surfaces that are still damp, leaking or exposed to water, press until adhesion begins. 
For a smooth surface, spread by hand with water. Wash hands immediately with soap and water (or with a Turbo cleaning wipe). 
Hardening begins 5 to 10 minutes later. 
After 60 minutes, the repaired part can be used again.
The surfaces to be bonded must be dry, free of grease and dust.
Capacity: 56 g.
Compatible with all vehicles.